You have no items in your shopping cart.
Additional Information
| Manufacturer | EtherWAN |
| Datasheet |  |
Product Description
The ED3171 is a point-to-point Managed Ethernet Extender designed to operate in harsh environments that efficiently extends 10/100 Ethernet circuits to over 300meters (984feet) at 50Mbps using existing cross-over pair copper wire. The ED3171 functions at temperatures ranging from -40C to 75C (-40F to 167F) and is tested for functional operation @ -40C to 85C (-40F to 185F). The ED3171 will allow Ethernet connectivity in existing facilities without pulling extra cable. This is the perfect solution to Ethernet on the factory floor where systems have been upgraded from slower serial communications to Ethernet networking. Installation is easy with a single switch setting, one end is set for local and the other remote. The ED3171 is used in pairs to extend Ethernet connectivity over existing voice grade copper wire.
ED3171 provides LED display for Power, VDSL speed and Ethernet connection status. ED3171 also provides several advanced functions such as System, SNMP, F/W upgrade, and Load Default setting through the Web-based browser to enhance total networking performance.
KEY FEATURES
> Complies with NEMA TS1 & TS2 Environmental requirements for Traffic control equipment
> Complies with IEC61000-6-2 EMC Generic standard immunity for Industrial environment
> Operates transparent to higher layer protocols such as TCP/IP
> Ethernet Port: 10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX
> Ethernet Extender(RJ-11 and Terminal Block) Port: Symmetrical on the VDSL, High-speed Full-duplex 50Mbps communications link over existing copper Telephone line
> Support DIP switch to select Local or Remote side
> Ten speeds with speed indicator LEDs on front panel of unit, Up to 50Mbps @ about 300meters (984ft.), Down to 1Mbps @ about 1,900meters (6,232ft.)
> Support external Hardware Watch Dog
> Support Web, CLI, SNMP management Interface
> Link Status (for VDSL, Ethernet), Get/Set IP, Get Rate, Set Rate (for CO site), Get Counter, Get SNR (Local, Remote), SNMP setting (Community), System setting, Reset to Default, F/W upgrade through the management Interface
> Redundant power inputs with Terminal Block and DC Jack
> -40C to 75C (-40F to 167F) operating temperature range
> Hardened aluminum case
> Supports DIN-Rail or Panel Mounting installation
ED3171 provides LED display for Power, VDSL speed and Ethernet connection status. ED3171 also provides several advanced functions such as System, SNMP, F/W upgrade, and Load Default setting through the Web-based browser to enhance total networking performance.
KEY FEATURES
> Complies with NEMA TS1 & TS2 Environmental requirements for Traffic control equipment
> Complies with IEC61000-6-2 EMC Generic standard immunity for Industrial environment
> Operates transparent to higher layer protocols such as TCP/IP
> Ethernet Port: 10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX
> Ethernet Extender(RJ-11 and Terminal Block) Port: Symmetrical on the VDSL, High-speed Full-duplex 50Mbps communications link over existing copper Telephone line
> Support DIP switch to select Local or Remote side
> Ten speeds with speed indicator LEDs on front panel of unit, Up to 50Mbps @ about 300meters (984ft.), Down to 1Mbps @ about 1,900meters (6,232ft.)
> Support external Hardware Watch Dog
> Support Web, CLI, SNMP management Interface
> Link Status (for VDSL, Ethernet), Get/Set IP, Get Rate, Set Rate (for CO site), Get Counter, Get SNR (Local, Remote), SNMP setting (Community), System setting, Reset to Default, F/W upgrade through the management Interface
> Redundant power inputs with Terminal Block and DC Jack
> -40C to 75C (-40F to 167F) operating temperature range
> Hardened aluminum case
> Supports DIN-Rail or Panel Mounting installation
